Kim Lighting KFL3-40L-90-5K8-N-UNV-K-WHT Large Architectural LED Floodlight, Threaded Knuckle Mount, 120-277V, 90W, 10000 Lumens, 80 CRI, Narrow Beam, 5000K, White Matte Textured

Description

PICTURE MAY NOT REPRESENT ACTUAL ITEM FINISH. PLEASE REFER TO PRODUCT DESCRIPTION.Construction• One piece die-cast, low copper (<0.6% Cu) Aluminum Alloy 360 with vents and .100″ minimum wall thickness• Finish: fade and abrasion resistant, electrostatically applied, thermally cured, triglycidal isocyanurate (TGIC) polyester powdercoat• Lens is impact resistant 1/8″ tempered glass with anti-reflective coating• Lens has a one-piece extruded vulcanized silicone gasket• Lens frame one piece die-cast, low copper (<0.6% Cu) Aluminum Alloy 360 and .100″ minimum wall thickness• Lens frame has a one-piece O-ring extruded vulcanized silicone gasket• Mid-frame one piece die-cast, low copper (<0.6% Cu) Aluminum Alloy 360 and .100″ minimum wall thickness• Mid-frame secures to lens frame and housing by stainless steel recessed Allen-head screws• Silicone gaskets throughout• All external fasteners are stainless steelOptics• LEDs mount to a metal printed circuit board assembly (MCPCB)• Optical lenses are clear injection molded PMMA acrylicInstallation• Fixtures must be grounded in accordance with national, state and/or local electrical codesElectrical• Universal voltage, 120 through 277V with a +/- 10% tolerance• Driver is Underwriters Laboratories recognized• Drivers shall have greater than a 0.9 power factor, less than 20% harmonic distortion, and be suitable for operation in -40°C to 40°C ambient environments• Luminaire shall be capable of operating at 100% brightness in a 40°C environment• Both driver and optical array have integral thermal protection that will dim the luminaire upon detection of temperatures in excess of 85°C• Dimming range from 10% to 100% through the use of standard 0-10V interface on the programmable driver• Modular wiring harness in the service area provides user access to the dimming circuitry